ISL55210IRTZ
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Number of Pins | 16 |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 4.2V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 35mA |
| Supply Current-Max | 39.5mA |
| Slew Rate | 5600 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 50μA |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 1.4mV |
| Bandwidth | 2.2 GHz |
| Gain Bandwidth Product | 4MHz |
| Unity Gain BW-Nom | 4000000 kHz |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| -3db Bandwidth | 2.2 GHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL55210IRTZ Overview
An op amp of this type is a OPERATIONAL AMPLIFIER-type. There is a growing number of terminations approaching the number of 16. Buffer amplifier has a total of 16 pins on it. This linear amplifier should be powered by an 3.3V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 16 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 1.4mV. An 35mA volt supply current is needed for this linear amplifier to operate. Buffer op amp is equipped with 1 channels on the device. Using this buffer op amp requires a temperature of at least -40°C. You should not use op amp above 85°C . The operating supply voltage of instrumentation amplifier is rated 3.3V voltage. With regard to the supply voltage, this electrical component is capable of working from under 4.2V. In order to ensure that the instrumentation amplifier's supply voltage remains above 3V, it is recommended to keep it higher.
ISL55210IRTZ Features
16 Pins
supply voltage of 3.3V
ISL55210IRTZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL55210IRTZ Instrumentational OP Amps applications.
- Video data acquisition
- Instrumentation
- E-book readers
- Gaming industry
- Automotive sensors
- Proportional counter tubes
- Scintillation detectors
- Switching amplifier
- Signal operation
- Portable media players