ISL54054IHZ-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 6 |
| Resistance | 360mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 500nA |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 22 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 17 ns |
| Off-state Isolation-Nom | 74 dB |
| Normal Position | NO |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL54054IHZ-T Overview
The electrical component comes in SOT-23-6 packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel. A total of 6 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. As far as internal resistance is concerned, it has 360mOhm. For functions related to 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The digital multiplexer has a low cost Single supply. 1.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 500nA. When the digital multiplexer is charged above 500nA, damage can occur. With a SPDT analog IC integrated into the board. During operation, the multiplexer should not be exposed to a temperature above 85°C.
ISL54054IHZ-T Features
1 Channels
500nA Supply Current
ISL54054IHZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL54054IHZ-T Analog Switches & Multiplexers ICs applications.
- High-Voltage
- SONET/SDH ADM
- Intelligent PBX
- Fiber to the Home
- DSUs
- Fiber In The Loop (FITL)
- Communication systems
- DSLAMs
- Private Branch Exchange (PBX)
- Relay Replacement