ISL43L121IUZ-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | SEPARATE OUTPUT |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Max Supply Current | 30nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 25 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NC |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL43L121IUZ-T Overview
Due to its MSOP packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel is used. In total, there have been 8 terminations. A high-quality output is provided by the electrical component's 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. This digital multiplexer has 250mOhm internal resistance. You can find the functions of the 8 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.65V. In order to operate this switch device, it would need a current of 30nA. A digital multiplexer may suffer damage if voltage is applied above 30nA. A SPDT analog IC is integrated into the board. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Temperatures above 85°C should not be used to operate the switches.
ISL43L121IUZ-T Features
2 Channels
30nA Supply Current
ISL43L121IUZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L121IUZ-T Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Battery Powered Systems
- Precision test equipment
- Fiber In The Loop (FITL)
- Relay replacements
- Data switching
- E1 Network Equipment
- High speed data transmission line cards
- Precision instrumentation
- Central office