IRSM836-045MA
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 37-PowerVQFN |
| Number of Pins | 37 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 37 |
| Applications | Appliance |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 24W |
| Technology | UMOS |
| Voltage - Supply | 13.5V~16.5V |
| Terminal Position | QUAD |
| Supply Voltage | 15V |
| Base Part Number | IRSM836-045 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Max Output Current | 4A |
| Power Supplies | 15V |
| Interface | Parallel |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Nominal Supply Current | 125μA |
| Output Configuration | Half Bridge (3) |
| Max Supply Current | 10mA |
| Turn On Delay Time | 1.5 μs |
| Logic Function | AND |
| Turn-Off Delay Time | 1.5 μs |
| Collector Emitter Voltage (VCEO) | 500V |
| Max Collector Current | 4A |
| Voltage - Load | 400V Max |
| Number of Drivers | 6 |
| Isolation Voltage | 1.5kV |
| Switching Frequency | 20kHz |
| Motor Type - AC, DC | AC, Synchronous |
| Height | 950μm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRSM836-045MA Overview
Drivers controllers includes a Traypackage.The part is packged with 37-PowerVQFN case.Mounting the part by Surface Mountis recommended.In this case, it is appropriate for the component connected to Appliance.There is a possibility of providing 13.5V~16.5Vvolts through the device.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.Drivers controllers is possible to categorize the motor type as AC, Synchronous.This part provides 37terminations.You can apply voltage at 400V Maxto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 15V.There is a recommended mounting method of PCB, Surface Mount.There is an analog integrated circuit AC MOTOR CONTROLLERpresent in the device.Using the IRSM836-045part number, it is located.This device is designed with a pin count of 37.Drivers controllers belongs to the series [0].Currently, there are 3 outputs available.Its maximum output current reaches 4Ato meet the operational requirements.Controller ic is equipped wController ich a total of 6 drivers.
IRSM836-045MA Features
Applications : Appliance
Load voltage across the chip 400V Max
base on IRSM836-045 number
designed with 3 outputs
with 6 Drivers
IRSM836-045MA Applications
There are a lot of Infineon Technologies IRSM836-045MA motor drivers applications.
- Footwell lighting
- PDAs
- Landscape lighting
- Fog lamps
- Accurate LED current matching
- Indicator circuit
- drivers for outdoor application
- Outdoor area lights
- parking lights
- Automotive applications