IR2301
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Additional Feature | FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 120μA |
| Propagation Delay | 220 ns |
| Turn On Delay Time | 220 ns |
| Voltage - Output | 10V |
| Rise Time | 130ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 200 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.3 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Max Junction Temperature (Tj) | 150°C |
| High Side Driver | YES |
| Ambient Temperature Range High | 150°C |
| Height | 5.33mm |
| Length | 9.88mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IR2301 Overview
For greater flexibility, the DIP package is adopted.There is a package in the form of Bulk.There are 2 drivers installed for this device.There are 8 terminations to form the base of its configuration.Mounting the device requires Through Hole.In order to operate, a voltage of 15V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.This subcategory of MOSFET Drivers has a number of useful electronic components.There are 8 component pins on the board.The allowable maximum value of operating temperature is 150°C.Temperatures below -40°C are allowed as the minimum.For operation, it requires a voltage of 20V.In order for it to operate, the supply voltage of 5V must be maintained.In addition, technology that is unique can be used to provide FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT.10V is its output voltage.
IR2301 Features
Embedded in the Bulk package
2 drivers
FLOATING LOAD DRIVER; UNDER VOLTAGE LOCKOUT CIRCUIT
IR2301 Applications
There are a lot of International Rectifier IR2301 gate drivers applications.
- PCMCIA applications
- Automotive Applications
- General Purpose 3-Phase Inverter
- Motor controllers
- Telecom switch mode power supplies
- A/D drivers
- Portable computers
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Supplies for controller area network (CAN),