IPS521STRL
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Supplier Device Package | D2Pak (SMD-220 5-Lead) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Current - Output (Max) | 1.9A |
| Nominal Supply Current | 600μA |
| Output Configuration | High Side |
| Power Dissipation | 1.56W |
| Output Current | 1.9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 55mOhm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS521STRL Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 1 for output.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Auto Restart features.The 5 pins are used for the operation of the system.This LED driver has a maximum output of 1.9AV.The lighting driver is mounted in the way of Surface Mount.The output current is set to 1.9A in this case.There are a total of 1 channels to choose from.The maximum operating temperature of 150°C°C allows for stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.
IPS521STRL Features
1 channels
IPS521STRL Applications
There are a lot of Infineon Technologies IPS521STRL Power Switches ICs applications.
- Solid-State Drives
- USB Ports/Hubs
- Portable/Handheld Devices
- Hot Swaps
- Wireless Headsets
- Hot Swap
- Wireless/Networking Cards
- Solid State Drivers
- USB Power Distribution
- PDAs