IH5047CPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 80Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5047 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | 4PST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 200ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IH5047CPE Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around 0°C~70°C TA. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 4 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. As part of its design, the 16 series is equipped with this electronic component. Based on 4PST - NO switching circuits, these analog multiplexers work. 1 circuits are used in this analogue multiplexer. Try searching with IH5047 to find analog multiplexer variants. It has an internal resistance of 80Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. Analog switch ics with Dual supply type are cost-effective. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 4-bits are supported.
IH5047CPE Features
4 Channels
Switch Circuit: 4PST - NO
4-Bit
IH5047CPE Applications
There are a lot of Maxim Integrated IH5047CPE Analog Switches & Multiplexers ICs applications.
- Power routing
- E1 Multiplexer
- High-Voltage
- Access Concentrators
- Medical
- Voice over IP/DSL – Integrated Access Devices, Smart
- Multi-Line E1 Interface Cards
- DVD-R
- SDH/SONET multiplexers
- Audio and video switching