IH5041CPE+
| Parameters | |
|---|---|
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Normal Position | NO |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IH5041 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
IH5041CPE+ Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around 0°C~70°C TA. In total, 16 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. The multiplexer consists of 2 circuits. Try searching with IH5041 if you're looking for variants. There is a standard Multiplexer or Switches analogue multiplexer here. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Providing power to the analogue multiplexer requires a voltage of 4.5VV.
IH5041CPE+ Features
1 Channels
Switch Circuit: SPST - NO
IH5041CPE+ Applications
There are a lot of Maxim Integrated IH5041CPE+ Analog Switches & Multiplexers ICs applications.
- Optical Applications
- SONET/SDH ADM
- SDH/SONET multiplexers
- PDH Multiplexers
- Switching Systems
- Video switching
- Communication systems
- FTTH
- PBXs
- Medical systems