IDT72V3694L10PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Access Time | 10 ns |
| Direction | Bidirectional |
| Organization | 32KX36 |
| Memory Width | 36 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V3694L10PF Overview
TQFP is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains a total of 128 terminations.The operation pins are 128 pins.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .A BI-DIRECTIONAL FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 3.15V volts.FIFO memory can handle a maximum supply voltage of 3.45V V.The FIFO memory IC has a total of 128 pins.It maintains good accuracy at a 100MHz frequency.The gadget can also generate a value of MAILBOX BYPASS REGISTER .
IDT72V3694L10PF Features
FIFOs category
IDT72V3694L10PF Applications
There are a lot of Integrated Device Technology (IDT) IDT72V3694L10PF FIFOs Memory applications.
- Down-Hole Energy Drilling
- Game Controller
- Routers
- Address mapping
- Portable Information Devices
- HDD
- Firmware loaders
- GPS Offender Tracking
- Transistors
- Rate buffers