IDT723612L20PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; PARITY GENERATOR/CHECKER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| JESD-30 Code | S-PQFP-G120 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 1mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 64X36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Standby Current-Max | 0.001A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT723612L20PF Overview
FIFO memory chip is included in the LQFP package.Mounting it Surface Mount is recommended.An input voltage of 5V results in high efficiency.As a result of this, FIFO means contains 120 terminations.FIFO design requires a maximum current of 1mA to operate.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .In this part, the memory type is BI-DIRECTIONAL FIFO .Currently, it has 120 pins.It is normal for a component to be equipped with 5V power supplies.This gadget can also be used to generate MAIL BOX; PARITY GENERATOR/CHECKER .Voltage FIFO memory IC's maximum is set to 5.5V .Keep the supply voltage (Vsup) above 4.5V for normal operation.The FIFO memory IC is controlled by a clock with a frequency of 50MHz .
IDT723612L20PF Features
FIFOs category
Clock frequency of 50MHz
IDT723612L20PF Applications
There are a lot of Integrated Device Technology (IDT) IDT723612L20PF FIFOs Memory applications.
- Portable Information Devices
- Disk Controllers
- Rate buffers
- Fabrication Site
- Event Recorder
- Network bridges
- Analog-to-digital converters
- Switches
- Digital buffering
- Address mapping