IDT72125L50SO8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PORTA/PORTB:PARALLEL/SERIAL |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 100mA |
| Clock Frequency | 15.4MHz |
| Access Time | 50 ns |
| Organization | 1KX16 |
| Output Characteristics | 3-STATE |
| Memory Width | 16 |
| Standby Current-Max | 0.006A |
| Memory Density | 16384 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT72125L50SO8 Overview
FIFO memory chip can be found in the SOIC package.In this case, it is packaged in case number Tape & Reel (TR) .Surface Mount is memory IC's recommended mounting method.With a supply voltage of 5V volts, high efficiency is possible.As a result of this, FIFO means contains 28 terminations.In order for FIFO design to operate, FIFO design requires a maximum current of 100mA .At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.The FIFO memory IC is equipped with a total of 28 pins.Normally, 5V power supplies are owned by the component.This gadget can also be used to generate PORTA/PORTB:PARALLEL/SERIAL .In this case, the FIFO memory IC's maximum supply voltage is set to 5.5V .As a general rule, keep the supply voltage (Vsup) above 4.5V in order to ensure normal operation.FIFO memory ICs run at a frequency of 15.4MHz .
IDT72125L50SO8 Features
FIFOs category
Clock frequency of 15.4MHz
IDT72125L50SO8 Applications
There are a lot of Integrated Device Technology (IDT) IDT72125L50SO8 FIFOs Memory applications.
- Data communications
- Measurement Equipment
- Down-Hole Energy Drilling
- Tape controllers
- Application that requires re-writable nonvolatile parameter memory
- Routers
- Video time base correction
- Test site
- Optical memories
- SPD for DDR3 Memory Modules