ICL7611DCPA+
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7611 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 1mA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±1V~8V |
| Bandwidth | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 44 kHz |
| Average Bias Current-Max (IIB) | 0.004μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 15mV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | YES |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Voltage Gain-Min | 4000 |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
ICL7611DCPA+ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. This electrical part should be mounted using type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . In total, there are 1 circuits on this buffer amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. We recommend that you use this electronic part with an 1mA supply in order to get the best performance from it. This op amp ic can conduct a minimum voltage gain of 4000.
ICL7611DCPA+ Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
ICL7611DCPA+ Applications
There are a lot of Maxim Integrated ICL7611DCPA+ Instrumentational OP Amps applications.
- Division circuits
- Information processing
- Cinema or auditorium audio system
- High/low-pass filter circuit
- Switching amplifier
- Video amplifiers
- Voltage regulation circuit
- Polarized electrodes
- pH (acidity)
- Subtraction operation circuits