ICE2QR2280GXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BSOP (0.295, 7.50mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | CoolMOS™, CoolSET™-Q1 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 53W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 52kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10.5V~27V |
| Input Voltage (Min) | 11.2V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 52kHz |
| Input Voltage (Max) | 26V |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Drain to Source Voltage (Vdss) | 800V |
| Switcher Configuration | SINGLE |
| Max Dual Supply Voltage | 800V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height Seated (Max) | 1.75mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICE2QR2280GXUMA1 Overview
A ac to dc converter of the package 12-BSOP (0.295, 7.50mm Width) contains the ac to dc converter.The AC/DC power converter type is Tape & Reel (TR) .Surface Mount is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As soon as the switching frequency reaches 52kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 10.5V~27V , the AC/DC converter may be used.There are a total of 12 terminations.There are 12 pins on this ac/dc converter.The pins of the ac-dc converter total to 12 .The ac dc converters are suitable to mount by Surface Mount .It belongs to a manufacturer family of CoolMOS?, CoolSET?-Q1 .High efficiency can be achieved when AC to DC converters frequency is set to 52kHz .Based on a unique technique, the input voltage can be ensured to have the maximal value of 26V .As a result of using this ACDC converter, PWM CONTROL TECHNIQUE ALSO POSSIBLE can also be detected.
ICE2QR2280GXUMA1 Features
Packaged with 12-BSOP (0.295, 7.50mm Width)
Switching Frequency at 52kHz
With 12 pins
ICE2QR2280GXUMA1 Applications
There are a lot of Infineon Technologies ICE2QR2280GXUMA1 AC DC Converters applications.
- Automotive Clusters
- Switching AC-DC Charger
- Dimmers
- Power tools
- Battery Chargers
- Home appliances
- Automotive Infotainment
- Replaces linear transformers
- Universal Off-Line Power Supplies
- Universal input AC/DC adapters (15W - 45W)