ICE2BS01
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | ICE2BS01 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 8.5V~21V |
| Control Features | Soft Start |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.7A |
| Frequency - Switching | 67kHz |
| Input Voltage (Max) | 21V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.5V |
| Height Seated (Max) | 4.37mm |
| Length | 9.52mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
ICE2BS01 Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.In Tube case, the ac dc converter is available.Through Hole is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.At this point, the switching frequency reaches 67kHz .Within the range of 8.5V~21V supply voltage (Vcc/Vdd), it can be used.In total, there are 8 terminations.There are 8 pins in the ac-dc converter.A similar acdc converter can be searched by using the ICE2BS01 family.AC to DC converter is included in Switching Regulator or Controllers .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 21V .The maximum current that can be supplied to the ac to dc inverter is 0.7A .
ICE2BS01 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
ICE2BS01 Applications
There are a lot of Infineon Technologies ICE2BS01 AC DC Converters applications.
- ATX/BTX Auxiliary Power
- Wireless System
- Adaptors for DSCs
- Laptops
- Replaces linear transformers
- Records
- Low-Voltage I/O System Power
- Standby Power Supply
- MP3
- Air Conditioning