ICB1FL01G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width), 18 Leads |
| Surface Mount | YES |
| Operating Temperature | -25°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| Type | PFC/Ballast Controller |
| Terminal Finish | MATTE TIN |
| Voltage - Supply | 10.5V~17.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 20kHz~100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 18 |
| JESD-30 Code | R-PDSO-G18 |
| Input Voltage-Nom | 15V |
| Current - Supply | 5mA |
| Output Current-Max | 0.7A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Dimming | No |
| Height Seated (Max) | 2.66mm |
| Length | 12.8mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
ICB1FL01G Overview
Tape & Reel (TR)'s materials have been used in the packaging.Package cost is one of the reasons why electronics manufacturers choose the 20-SOIC (0.295, 7.50mm Width), 18 Leads.Using Surface Mount, the board is mounted.As a standard grade, it's referred to as Type PFC/Ballast Controller.It requires a power supply voltage to function properly.Always keep it at -25°C~125°C.A 20kHz~100kHz frequency can still be operated accurately.The 18-terminations are built into it.The system works by drawing current from 5mA's supply.The device runs in 1 functions.There are 18 pins total in its sum.0.7A is the maximum output current.
ICB1FL01G Features
Mounting type of Surface Mount
ICB1FL01G Applications
There are a lot of Rochester Electronics, LLC ICB1FL01G Lighting Controllers applications.
- Decoupling or bypassing
- DC/DC, DC/AC, and AC/AC converters
- Power line buffering
- To reduce power noise & signal noise
- Motor start
- Frequency converters
- Lighting ballast
- Spot welding
- To enhance power efficiency
- Coupling or blocking