HT0740LG-G
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Voltage - Supply | 3.15V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HT0740 |
| Number of Outputs | 1 |
| Output Voltage | 8.5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Rise Time | 650μs |
| Fall Time (Typ) | 3 ms |
| Turn-Off Delay Time | 150 μs |
| Rise / Fall Time (Typ) | 650μs 3ms Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Driven Configuration | High-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 3.15V |
| High Side Voltage - Max (Bootstrap) | 400V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HT0740LG-G Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 3.15V~5.5V supply voltage.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~85°C TA.Non-Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts are available for its base part number HT0740.The device is mounted with Surface Mount.During design, it is configured with 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Ideally, the high-side voltage should not exceed 400V.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.Keeping the supply current at 500μA ensures greater stability.When this voltage is produced, it is marked as 8.5V.With a supply voltage of 500μA, it operates.
HT0740LG-G Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 400V
HT0740LG-G Applications
There are a lot of Microchip Technology HT0740LG-G gate drivers applications.
- Isolated Supplies for Motor Control
- Line drivers
- High-speed communications
- RGB applications
- Isolated switch mode power supplies (SMPS)
- High frequency line drivers
- Solar power supplies
- UPS systems
- High current laser/LED systems
- Pulse transformer drivers