HIP2101IB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 14V |
| Min Supply Voltage | 9V |
| Power Dissipation-Max | 1.3W |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Current - Output | 2A |
| Turn On Delay Time | 13 ns |
| Voltage - Output | 400mV |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Turn-Off Delay Time | 13 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 0.056 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
HIP2101IB Overview
Gate drivers provides greater flexibilGate driversy to use the SOIC package.Bulk represents the packaging method.2 drivers are incorporated for its configuration.Its configuration starts with 8 terminations.You mount it with Surface Mount.At the time of design, it is configured with 8 pins.A supply voltage of 12V is required for operation.Its interface IC is HALF BRIDGE BASED MOSFET DRIVER.As a maximum, there is 2A limit to the output current.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.There is a maximum acceptable operating temperature of 150°C.Mosfet gate drivers is permissible to operate at a temperature of -40°C.To maintain higher stability, the supply current should always be 3mA.In order for the device to operate, the supply voltage must be 14V.9V is the minimum voltage required to operate it.As a result, the current it emits is 2A.There is an output voltage of 400mV for this device.
HIP2101IB Features
Embedded in the Bulk package
2 drivers
8 pins
HIP2101IB Applications
There are a lot of Intersil (Renesas Electronics America) HIP2101IB gate drivers applications.
- Industrial Modules
- 3-Phase Motor Inverter Driver
- Line drivers
- Solar power supplies
- Solar inverters
- UPS systems
- DC/DC converters
- Portable Media Players
- Video amplifiers
- PCMCIA applications