HI3-0518-5Z
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Supplier Device Package | 18-PDIP |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 750Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF Max |
| Switch Time (Ton, Toff) (Max) | 175ns, 175ns |
| Voltage - Supply, Dual (V±) | ±15V |
| RoHS Status | ROHS3 Compliant |
HI3-0518-5Z Overview
The electronic part can be shipped overseas conveniently because it is packaged in 18-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~75°C TA. There are 1 circuits in this multiplexer. There is a 18-PDIP package offered by suppliers.
HI3-0518-5Z Features
HI3-0518-5Z Applications
There are a lot of Rochester Electronics, LLC HI3-0518-5Z Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Avionics and Military Systems
- Modems
- SDH
- Microwave transmission systems
- Signal routing between systems
- Cell phones
- Cellular phones
- PBX interfaces
- Communications systems