HEF4052BT,653
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4052 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-on Time-Max | 85ns |
| Switch-off Time-Max | 180ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Drain to Source Resistance | 350Ohm |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
HEF4052BT,653 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. A 4 channel electronic part produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. The multiplexer consists of 2 circuits. Try searching for 4052 variants of the analog switch ic. The datasheets for the 16 pins explain the functions. This analog switch requires a voltage of 3V~15V to drain from a single voltage supply. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. Drain to Source resistance for this electronic component is 350Ohm.
HEF4052BT,653 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 70MHz
Drain-to-Source resistance: 350Ohm
HEF4052BT,653 Applications
There are a lot of Nexperia USA Inc. HEF4052BT,653 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Residential Gateways, Home Gateway/Router
- MP3 players
- Isolation
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio signal routing
- Audio and video signal routing
- CSU
- Audio/video switches
- Frame Relay Equipment