HEF40374BT,653
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 40374 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 17MHz |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 50mA 62mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 80ns @ 15V, 50pF |
| Prop. Delay@Nom-Sup | 250 ns |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 250 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
HEF40374BT,653 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 3V~15V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 4000B series. Its output frequency should not exceed 17MHz. There are 1 elements in it. It has been determined that there have been 20 terminations. It is a member of the 40374 family. A voltage of 5V provides power to the D latch. It is part of the FF/Latchesbase part number family. For normal operation, the supply voltage (Vsup) should be above 3V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. The flip flop has 2ports embedded within it.
HEF40374BT,653 Features
Tape & Reel (TR) package
4000B series
HEF40374BT,653 Applications
There are a lot of NXP USA Inc. HEF40374BT,653 Flip Flops applications.
- Shift Registers
- ESCC
- Latch
- Registers
- Individual Asynchronous Resets
- Computers
- Load Control
- Functionally equivalent to the MC10/100EL29
- Data storage
- High Performance Logic for test systems