HEF4027BT,653
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4027 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 2.4mA |
| Clock Frequency | 30MHz |
| Current - Quiescent (Iq) | 16μA |
| Current - Output High, Low | 3mA 3mA |
| Output Polarity | COMPLEMENTARY |
| Number of Gates | 2 |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| fmax-Min | 4 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
HEF4027BT,653 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. The output it is configured with uses Differential. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 3V~15Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. The type of this D latch is JK Type. It is a type of FPGA belonging to the 4000B series. It should not exceed 30MHzin terms of its output frequency. T flip flop consumes 16μA quiescent energy. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 4027, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 7.5pFfarad input capacitance is used here. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. As a result of its output current of 2.4mA, it is very flexible in terms of design. A basic building block consists of 2 gates.
HEF4027BT,653 Features
Tape & Reel (TR) package
4000B series
2 gates
HEF4027BT,653 Applications
There are a lot of Nexperia USA Inc. HEF4027BT,653 Flip Flops applications.
- Test & Measurement
- Data transfer
- ESCC
- Common Clocks
- Pattern generators
- Convert a momentary switch to a toggle switch
- Dynamic threshold performance
- ATE
- Event Detectors
- ESD protection