HCF4510BEY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HCF4510 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 150 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | BCD Counter |
| Trigger Type | Positive Edge |
| Number of Output Lines | 4 |
| fmax-Min | 5.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Count Rate | 11MHz |
| Timing | Synchronous |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
HCF4510BEY Overview
This device is packaged in a 16-DIP (0.300, 7.62mm) package. The configuration of this device is based on 16terminations. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. A wire connects the 1elements. The total number of component pins is 16. As a result, it is packaged as Tube. To connect the circuit's other components, there are 16pins. The way of Through Hole is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. It is decided to use the logic type [0]. -55°C~125°Cshould be the operating temperature. Mounting type Through Holeis used. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The device stores 4bits of information. An important feature of this electronic device is [0]. There are more related parts under the HCF4510base part number. In order for it to operate, it requires a supply voltage of 18V . Supply voltages can be as low as 3V volts (Vsup). The maximum supply voltage (Vsup) is up to 20V. It has 4 output lines.
HCF4510BEY Features
Embedded in the 16-DIP (0.300, 7.62mm) package
TCO OUTPUT
Operating supply voltage of 18V
HCF4510BEY Applications
There are a lot of STMicroelectronics HCF4510BEY Counters & Dividers applications.
- counting/frequency sy nthesizers-BCD output
- Signal gating
- SQUARING
- VHF, UHF, FM, AM, etc.
- Timing applications
- ALGEBRAIC COMPUTATION
- Communications Digital Frequency Synthesizers;
- Fixed or Programmable Frequency Division
- Frequency division
- TRUE RMS-TO-DC CONVERSION