HCF4035M013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | HCF4035 |
| Function | Parallel to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 150 ns |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | CONFIGURABLE |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 8 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HCF4035M013TR Overview
As a result, 16-SOIC (0.154, 3.90mm Width) package contains the embedded device. 16 is the total number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. Its operating supply voltage is rated at 5V. A total of 1 elements can be found on this part. Devices with 16 pins are available. Surface Mount is recommended for mounting. Surface Mount is the way this component is mounted. -55°C~125°C is the range of operating temperatures for the device. Votage within the range of 3V~15V is supplied. It is part of the 4000 series of electrical components. Search for similar parts based on the HCF4035 family. 18V is noted as the operating supply voltage of this chip. Additional aspects of this section are as follows: J AND KBAR SERIAL INPUT. There should be no less than 3V supply voltage (Vsup) for this part. 6 input lines are available on the device. It is recommended that the maximum supply voltage for this part is not greater than 20V (Vsup).
HCF4035M013TR Features
With 16 pins
Mounted in Surface Mount type.
Based on HCF4035 family
Operate supply voltage at 18V
HCF4035M013TR Applications
There are a lot of STMicroelectronics HCF4035M013TR Shift Registers applications.
- data transfer
- Generate time delay toward digital circuits
- Data Format Converters
- Dual-rank shift, hold, and bus applications
- Data manipulation
- Serial to parallel converter
- LED matrix control
- Parallel to serial converter
- Counter
- Flash Memory