HCF4022BEY
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HCF4022 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 170 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| fmax-Min | 5.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2500000Hz |
| Count Rate | 11MHz |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
HCF4022BEY Overview
This device is supplied in the 16-DIP (0.300, 7.62mm) package. The configuration of this device is based on 16terminations. This device is fully flexible due to the supply voltage of [0]. The total number of component pins is 16. Packaging is based on Tube. In the circuit, there are 16pins that connect other parts. It is mounted in the way of [0]. As a member of 4000B series, it is well suited for various applications. Binary Counteris used as the logic type. Ideally, the operating temperature should be set to -55°C~125°C. Mounting type Through Holeis used. As a result, the device operates more reliably when a supply voltage of 3V~20Vis applied. The array has 4elements. Further related parts can be found under its base part number HCF4022. The device operates on a supply voltage of [0]. As low as 3V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 20V (Vsup). 1input lines are used to input binary data as on/off signals. With 8output lines, it is equipped with.
HCF4022BEY Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
Operating supply voltage of 18V
HCF4022BEY Applications
There are a lot of STMicroelectronics HCF4022BEY Counters & Dividers applications.
- Binary counter/decoder
- DIVISION
- Programmable binary and decade
- Dual Up Counters
- Timing applications
- SQUARING
- Time-delay circuits
- Fixed or Programmable Frequency Division
- TRUE RMS-TO-DC CONVERSION
- Clocks