HCF4021BEY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 17MHz |
| Base Part Number | HCF4021 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 320 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Input Current | 1μA |
| Number of Output Lines | 3 |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
HCF4021BEY Overview
In package 16-DIP (0.300, 7.62mm), there is an embedded device. Chip terminations add up to 16. A Tube case is used to pack it. Voltage rating of the part is 5V. This part has 1 elements. Devices with 16 pins are available. Mounting by Through Hole is recommended. Mounted in the same way as Through Hole. A temperature range of -55°C~125°C is used for the operating environment. Voltages within 3V~20V are supplied to the device. The 4000B series contains this electrical component. You can search for similar parts based on the HCF4021 family. For this part, Vsup should not be less than 3V. 9 input lines are available on the device. In this part, the maximum supply voltage (Vsup) should not exceed 20V. It has a total of 8 pins. A total of 3 output lines need to be operated. There are 8 circuits in this device. 17MHz is the frequency of the device.
HCF4021BEY Features
With 16 pins
Mounted in Through Hole type.
Based on HCF4021 family
With 3 output lines
HCF4021BEY Applications
There are a lot of STMicroelectronics HCF4021BEY Shift Registers applications.
- Remote control holding register
- Pattern Recognizers
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Cache memory in CPU
- Interconnectors
- Pseudo Random Pattern Generator
- ROM Chips
- Output expansion
- Delay Line