HCF4016M013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 28Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | MOS |
| Voltage - Supply | 3V~20V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HCF4016 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Voltage | 18V |
| Nominal Supply Current | 20nA |
| Power Dissipation | 200mW |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Logic Function | Buffer, Inverting |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 20 ns |
| Max Dual Supply Voltage | 10V |
| Min Dual Supply Voltage | 1.5V |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 100ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4016M013TR Overview
It is included in the 14-SOIC (0.154, 3.90mm Width) in order to save board space.The package is packaged in accordance with Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bilateral, FET Switches is used as the analog component of the multiplexers.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.When operated with a 3V~20V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 4000B series, the multiplexers can be used for a wide range of applications.There are 14 terminations included in its basic configuration.There is a base part number HCF4016 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 5V voltage.This turn signal switch contains 14 component pins.As a result, conductors end at GULL WING.There is a supply type of Dual, Single employed as part of this supply.A total of 14 pins are configured on this board.The mounting point is Surface Mount.In order for 5/15V to operate normally, a power supply is provided.The digital switch ic is an electronic part classified into Multiplexer or Switches.It operates with a resistance of 28Ohm.This turn signal switch's circuit uses 4 transmission channels.
HCF4016M013TR Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
HCF4016M013TR Applications
There are a lot of STMicroelectronics HCF4016M013TR Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- HD surveillance system
- A/D converters
- Signal router
- Time division multiplexing system
- Logic gates for other digital devices
- D/A converters
- Frequency multiplexing system
- Transmission from the computer system of a satellite
- Steel plants