FST3245QSC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LSSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 0.25 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.66mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
FST3245QSC Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-LSSOP (0.154, 3.90mm Width).Tube represents its packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.It is designed with 20 terminations as part of its basic configuration.The turn signal switch is supplied with a voltage of 4.5V volts.Signal switch has 20 component pins.It is the end of conductors that is represented by GULL WING.The logic switch is a member of the family of CBT/FST/QS/5C/B.There are 8 bits in signal multiplexer.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.A resistance of 2 is used to operate the signal switching.
FST3245QSC Features
Supplied in the 20-LSSOP (0.154, 3.90mm Width) package
FST3245QSC Applications
There are a lot of Rochester Electronics, LLC FST3245QSC Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Injectors
- Code converters
- Code conversion
- Frequency multiplexing system
- Communication system
- Automatic Monitoring systems
- Data-routing applications
- High-performance memory systems
- Idle motor