FSL156MRBN
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2.2Ohm |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 26W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FSL156 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 400μA |
| Current | 1.6A |
| Power Dissipation | 1.5W |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 500μA |
| Turn On Delay Time | 14 ns |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Turn-Off Delay Time | 32 ns |
| Max Output Power | 30W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.67mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 815.6mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| Series | FPS™ |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
FSL156MRBN Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches 67kHz , the circuit is closed.It can be used within the range of 7.5V~26V supply voltage (Vcc/Vdd).There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.Through Hole is a suitable mounting point for the ac dc converters.It belongs to the family of FPS? manufacturers.Similar acdc converters can be found using the FSL156 family.A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter can handle a maximum supply current of 500μA .This power AC DC's resistance can be determined to be 2.2Ohm .The AC to DC power converter is capable of operating at a maximum output power of 30W .
FSL156MRBN Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Resistance : 2.2Ohm
FSL156MRBN Applications
There are a lot of ON Semiconductor FSL156MRBN AC DC Converters applications.
- Standby Power Supply
- Adapter/Charger for Cell
- Adaptors for DSCs
- Standby power
- Replaces linear transformers
- Standby power supplies for VCR
- AC--DC Adapter
- Smartphones
- Standby power supplies for IR
- PDAs