FSDM1265RBWDTU
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-220-6 Full Pack, Formed Leads |
| Number of Pins | 6 |
| Weight | 1.6g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 110W |
| Max Power Dissipation | 50W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | FSDM1265 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5mA |
| Power Dissipation | 50W |
| Output Current | 5.3A |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 82% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Voltage - Start Up | 12V |
| Height | 9.4mm |
| Length | 10.1mm |
| Width | 4.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FSDM1265RBWDTU Overview
There is a ac to dc converter embedded in package TO-220-6 Full Pack, Formed Leads .The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -25°C~85°C TA °C.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.As soon as the switching frequency reaches 66kHz , the circuit is closed.This AC/DC converter is designed for use within the range of 8V~20V supply voltage (Vcc/Vdd).A total of 6 terminations have been recorded.The ac/dc converter has 6 pins.Through Hole is the recommended mounting method for the ac dc converters.It is a member of FPS? manufacturer family.If you select the FSDM1265 family, you will be able to search for similar acdc converters.A total of 1 outputs need to be run.The output current is set to 5.3A .There is a maximum supply current of 5mA that AC to DC converter can handle.It is possible to determine the resistance of this power AC DC to be 900mOhm .
FSDM1265RBWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 5.3A
Resistance : 900mOhm
FSDM1265RBWDTU Applications
There are a lot of ON Semiconductor FSDM1265RBWDTU AC DC Converters applications.
- Home appliances
- Power Adaptors
- Battery chargers for smart phones
- Tablets
- Laptops
- Small off-line low voltage power supplies
- Vacuum Cleaner
- AC/DC Adaptors/Chargers for Cell Phones
- ATX/BTX Auxiliary Power
- Chargers for cell/cordless phones