FSA3157L6X
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 18mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA3157 |
| Number of Outputs | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 1μA |
| Power Dissipation | 180mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 23 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Drain to Source Voltage (Vdss) | 250V |
| Turn-Off Delay Time | 12.5 ns |
| Continuous Drain Current (ID) | 15.6A |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 7Ohm |
| Height | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSA3157L6X Overview
The electronic component is convenient to ship overseas because it is packed in a 6-UFDFN. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. There are 6 terminations totally. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 2.3V voltage supply. Circuits based on SPDT switching are used to construct these analog switch ics. Use FSA3157 to search for variants of the digital switches. A 15Ohm internal resistance characterizes this multiplexer. Datasheets for 6 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Single supply type are cost-effective. A low voltage of 1.65V should be applied to the electronic component. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. Operating 1 inputs is required. The analog switch ics includes 2 outputs.
FSA3157L6X Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
FSA3157L6X Applications
There are a lot of ON Semiconductor FSA3157L6X Analog Switches & Multiplexers ICs applications.
- Routers
- Automatic test equipment
- Transmit
- FTTH
- Communication systems
- Remote Powered Equipment
- Cellular phones
- ISDN NT1/TA
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Audio and video routing