FSA1258L8X
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 1.15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA1258 |
| Output | SEPARATE OUTPUT |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Power Dissipation | 180mW |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 50 ns |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 20 ns |
| On-State Resistance (Max) | 1.15Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 2nA Typ |
| Channel Capacitance (CS(off), CD(off)) | 11.5pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 35ns, 15ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 500μm |
| Length | 1.6mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSA1258L8X Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-UFQFN. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 8 terminations. As a result of its 2 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.7V voltage supply. The analog switch ics are built using SPST - NO/NC switching circuits. If you are looking for variants of the digital switch, trying search with FSA1258. Analog switches have 1.15Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 500nA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. 300MHz-bandwidths can be used to transfer data between multiplexers.
FSA1258L8X Features
2 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 300MHz
FSA1258L8X Applications
There are a lot of ON Semiconductor FSA1258L8X Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Battery Powered Instruments
- Industrial
- Industrial and process control systems
- Battery Powered Systems
- Video switching
- E1 Network Equipment
- Data switching
- HDTV
- SDH