FSA1157P6X
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FSA1157 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Power Dissipation | 180mW |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 25 ns |
| On-State Resistance (Max) | 900mOhm |
| Low Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 20pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 20ns, 30ns |
| Charge Injection | 20pC |
| Switch-on Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 2.1Ohm |
| Normal Position | NC |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSA1157P6X Overview
Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 6. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 2.7V voltage supply. The analog switch ics are built using SPST - NC switching circuits. Use FSA1157 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 900mOhm. Datasheets for functions of 6 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. 300MHz-bandwidths can be used to transfer data between multiplexers. Drain to Source resistance for this electronic component is 2.1Ohm.
FSA1157P6X Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 300MHz
Drain-to-Source resistance: 2.1Ohm
FSA1157P6X Applications
There are a lot of ON Semiconductor FSA1157P6X Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Fiber to the Home
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Avionics and Military Systems
- Relay Replacement
- MP3 players
- SONET/SDH ADM
- Industrial
- Communications systems
- PBX interfaces