FPF2223
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Auto Restart, Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 230mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Power Rating | 3.8W |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2223 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 625mA |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 625mA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 627mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 600 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 250mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.66A |
| Rds On (Typ) | 140m Ω |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Height | 725μm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
FPF2223 Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 6-VDFN Exposed Pad package.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.The lighting driver has Auto Restart, Load Discharge, Status Flag features.The FPF2223 family consists of this type.It has a total of 6 terminations.The 6 pins are used for the operation of the system.It has 1 functions.This operation requires the maximum output current to be decreased to 625mA.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.This lighting driver is mounted in the way of Surface Mount.It has 230mOhm resistance.It is set to 627mA in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.It has a maximum input voltage of 5.5V volts.A minimum input voltage of 1.8V volts is required for this LED driver.
FPF2223 Features
Supplied from 3.3V
Resistance of 230mOhm
FPF2223 Applications
There are a lot of ON Semiconductor FPF2223 Power Switches ICs applications.
- PDAs
- Notebook and Tablet Computers
- Hard Disk Drives
- Low Voltage I/O System Power
- Handheld Devices
- Hot Swap
- USB3.1 Power Delivery
- Notebook PC
- USB Ports/Hubs
- Portable/Handheld Devices