FPF2202
| Parameters | |
|---|---|
| Factory Lead Time | 21 Weeks |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 230mOhm |
| Subcategory | Peripheral Drivers |
| Power Rating | 3.064W |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | FPF2202 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 504mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 600 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 500mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.53A |
| Rds On (Typ) | 140m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 725μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FPF2202 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 6-VDFN Exposed Pad package.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.It is a member of the FPF2202 family.There are 6 terminations in it.It is necessary to use the 6 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.With a supply voltage of 3.3V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.230mOhm resistance is present in the lighting driver.In this case, the output current will be set to 504mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.Optimal efficiency requires a voltage of 5.5V.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2202 Features
Supplied from 3.3V
Resistance of 230mOhm
FPF2202 Applications
There are a lot of ON Semiconductor FPF2202 Power Switches ICs applications.
- Solid-State Drives
- Portable Music Players
- Low Voltage I/O System Power
- Portable Devices
- Hot Swap
- Storage (HDDs, SSDs)
- Storage Drives
- Mobile Communication Devices
- USB3.1 Power Delivery
- Set-Top Boxes