FPF2195
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Current Rating | 1.5A |
| Base Part Number | FPF2195 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 125 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 150mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 332μm |
| Length | 1.5mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2195 Overview
It is packaged in the manner of a Tape & Reel (TR).In the 6-UFBGA, WLCSP package, it is included.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.A lighting driver with Status Flag features is available.It belongs to the FPF2195 family.There are 6 terminations in it.In order to operate, 6 pins are used.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.It has a resistance of 135mOhm.This case has the output current set to 600mA.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 available channels.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.There is a maximum input voltage of 5.5V volts.A voltage of 1.8V volts is the minimum input voltage.
FPF2195 Features
Supplied from 3.3V
Resistance of 135mOhm
1 channels
FPF2195 Applications
There are a lot of ON Semiconductor FPF2195 Power Switches ICs applications.
- Telecom and Network Systems
- Notebook PC
- Storage Drives
- Hot Swap
- Hot-Swap Systems
- HDD, SSD
- Hard Disk Drives
- Gaming
- Portable GPS
- PC Card Hot Swap