FPF2146
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2146 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Output Current-Max | 0.2A |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 120m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
FPF2146 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 6-VDFN Exposed Pad.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.The maximum output voltage is P-Channel volts.In terms of features, the LED driving board has Power Good, Status Flag.It is part of the FPF2146 family of LED drivers.In total, there are 6 terminations.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.High efficiency is possible at 3.3V supply voltage.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has a resistance of 120mOhm ohms.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This LED driver can handle voltages up to 5.5V volts.It has a 1.8V volt minimum input voltage.
FPF2146 Features
Supplied from 3.3V
Resistance of 120mOhm
FPF2146 Applications
There are a lot of ON Semiconductor FPF2146 Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable Music Players
- Set-top-box
- Hot Swap
- Wireless Headsets
- Gaming
- Hot Swap
- Hot Swaps
- HDD, SSD
- Mobile Communication Devices