FPF2116
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 200mA |
| Base Part Number | FPF2116 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 200mA |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 125m Ω |
| Drain to Source Resistance | 160mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2116 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a SC-74A, SOT-753 package that includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.By default, it is set to output 1.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.It is a member of the FPF2116 family.It has a total of 5 terminations.For operation, 5 pins are used.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 200mA in order to meet the operation requirements.Using a voltage of 3.3V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.It has a resistance of 125mOhm.It belongs to the IntelliMAX? series.This case results in a 200mA output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.There is a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 1.8V volts.
FPF2116 Features
Supplied from 3.3V
Resistance of 125mOhm
FPF2116 Applications
There are a lot of ON Semiconductor FPF2116 Power Switches ICs applications.
- USB Power Distribution
- USB Power Distribution
- Portable/Handheld Devices
- Wireless/Networking Cards
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Hot Swap
- Mobile Communication Devices
- Gaming
- Portable Devices