FDMF6706C
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-PowerTFQFN |
| Number of Pins | 40 |
| Weight | 224mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | XS™ DrMOS |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Synchronous Buck Converters |
| Technology | DrMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FDMF6706 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 1V |
| Max Output Current | 40A |
| Interface | PWM |
| Operating Supply Current | 2mA |
| Output Configuration | Half Bridge |
| Output Current | 40A |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 40A |
| Rise Time | 12ns |
| Fall Time (Typ) | 11 ns |
| Voltage - Load | 3V~15V |
| Fault Protection | Over Temperature, Shoot-Through, UVLO |
| Number of Drivers | 2 |
| Rds On (Typ) | 1 Ω LS, 1 Ω HS |
| High Side Driver | YES |
| Load Type | Inductive |
| Height | 1.1mm |
| Length | 6mm |
| Width | 6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
FDMF6706C Overview
In this package, Tape & Reel (TR) is used.Cost savings are achieved by including H bridge in the 40-PowerTFQFN package.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 4.5V~5.5V.There is a mounting of H bridge circuit in Surface Mount.When -40°C~150°C TJ is operating at a certain temperature, motor driver H bridge can function normally.There are lots of uses for H bridge motor driver, including Synchronous Buck Converters.In order to mount H gate on the PCB, Surface Mount is used.Among full bridges specific characteristics are Bootstrap Circuit, Status Flag.There are 40 terminations used to end a transmission line with the H bridge that matches the characteristic impedance of the line.It is used as a pronged contact as H bridge ic of a signal interface when 40 pins are used.This H bridge ic has a base H bridge ic number of FDMF6706 which allows more related H bridge ics to be identified.H bridge circuit operates on a voltage of 5V.Basically, it is an electronic H-bridge that belongs to the XS? DrMOS series.The maximum load current a power supply can provide at a specified ambient temperature is 40A.The output pins and the power supply pins are conducting 40A current.It is equipped with 1 outputs.Hbridge 1V releases voltage.Integrated 2 drivers are available.
FDMF6706C Features
Available in 40-PowerTFQFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : FDMF6706
FDMF6706C Applications
There are a lot of ON Semiconductor FDMF6706C Full Bridge Drivers, Half-Bridge Drivers applications.
- DC-DC Converters
- OA equipments
- Home Appliances
- PC peripherals
- V-Core
- Voltage Regulators for CPUs
- Non-V-Core
- Optical disc drives
- Audio-visual equipment
- Quad DC motor