FDC6325L
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 700mW |
| Voltage - Rated DC | 8V |
| Max Power Dissipation | 700mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Current Rating | 1.8A |
| Base Part Number | FDC6325 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.8A |
| Voltage | 8V |
| Interface | On/Off |
| Current | 1.8A |
| Output Configuration | High Side |
| Power Dissipation | 700mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 1.5V~8V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 8V |
| Drain to Source Voltage (Vdss) | 8V |
| Nominal Input Voltage | 8V |
| Continuous Drain Current (ID) | 1.8A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~8V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 115m Ω |
| Drain to Source Resistance | 130mOhm |
| Height | 1mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FDC6325L Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the SOT-23-6 Thin, TSOT-23-6 package.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -55°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of 1.5V~8V is required for it to operate.A maximum output voltage of P-Channel volts has been specified.It belongs to the FDC6325 family.It contains 6 terminations.In order to operate, the 6 pins are used.This operation requires the maximum output current to be decreased to 1.8A.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 130mOhm.This case results in a 1A output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver can handle voltages up to 8V volts.The input voltage minimum is 2.5V volts.
FDC6325L Features
Resistance of 130mOhm
FDC6325L Applications
There are a lot of ON Semiconductor FDC6325L Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Solid-State Drives
- Handheld Devices
- Low Voltage I/O System Power
- Set-Top Boxes
- Telecom and Network Systems
- Portable/Handheld Devices
- Hot-Swap Systems
- Wireless Modem Data Cards