FAN73832N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Max Power Dissipation | 1.25W |
| Voltage - Supply | 15V~20V |
| Base Part Number | FAN73832 |
| Output Voltage | 620V |
| Max Output Current | 650mA |
| Nominal Supply Current | 850μA |
| Power Dissipation | 1.25W |
| Output Current | 350mA |
| Max Supply Current | 850μA |
| Propagation Delay | 730 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 730 ns |
| Rise Time | 100ns |
| Fall Time (Typ) | 80 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 350mA 650mA |
| Logic Voltage - VIL, VIH | 1.2V 2.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FAN73832N Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.The packaging method is indicated by Tube.A total of 2 drivers are integrated into its configuration.There is a mounting bracket in the way of Through Hole.Using a 15V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Non-Inverting is used as the input type in this program.There are various related parts under its base part number FAN73832.Mosfet driver is mounted using Through Hole.In the device, there are 8 pins.In the maximum case, the output current can be limited to 650mA.A high-side voltage can be set up to 600V (Bootstrap).Mosfet gate drivers supports a current output of 350mA.According to its maximum power dissipation, 1.25W is capable of conducting and transferring a large amount of power without overheating.To maintain higher stability, the supply current should always be 850μA.620V is the output voltage.
FAN73832N Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
FAN73832N Applications
There are a lot of ON Semiconductor FAN73832N gate drivers applications.
- Motor Drives
- Isolated Supplies for controller area network (CAN),
- Isolated Gate Driver Supplies
- PCMCIA applications
- High-speed communications
- Motor Control
- Industrial Power Supplies
- Digitally controlled power supplies
- 3-Phase Motor Inverter Driver
- Industrial Modules