FAN7081CM_F085
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Reach Compliance Code | unknown |
| Frequency | 200kHz |
| Max Output Current | 500mA |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Power Dissipation-Max | 625mW |
| Nominal Supply Current | 25μA |
| Power Dissipation | 625mW |
| Current - Output | 250mA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 300 ns |
| Voltage - Output | 100mV |
| Rise Time | 400ns |
| Fall Time (Typ) | 150 ns |
| Turn-Off Delay Time | 300 ns |
| Number of Drivers | 1 |
| RoHS Status | RoHS Compliant |
FAN7081CM_F085 Overview
For greater flexibility, its SOIC package is used.There are 1 drivers installed for this device.Devices are mounted by Surface Mount.At the time of design, it is configured with 8 pins.There is a maximum output current of 500mA that can be achieved.Temperatures greater than 125°C are not allowed.Temperatures below -40°C are allowed as the minimum.During operation, the supply voltage of 20V is its maximum value.10V is the minimum voltage required to operate it.As a result, the current it emits is 250mA.A higher frequency of 200kHz will improve efficiency.A voltage of 100mV is used as the output voltage.
FAN7081CM_F085 Features
1 drivers
8 pins
FAN7081CM_F085 Applications
There are a lot of Fairchild (ON Semiconductor) FAN7081CM_F085 gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated switch mode power supplies (SMPS)
- Commercial air-conditioning (CAC)
- UPS systems
- Motor Controls
- Motor Control
- Digitally controlled power supplies
- Portable computers
- RGB applications
- A/D drivers