FAN3229CMX-F085
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 460mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | FAN3229 |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Nominal Supply Current | 650μA |
| Output Current | 3A |
| Max Supply Current | 1.2mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 12ns |
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 12ns 9ns |
| Interface IC Type | FULL BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.033 µs |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Built-in Protections | UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FAN3229CMX-F085 Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.There is a package in the form of Tape & Reel (TR).A total of 2 drivers are integrated into its configuration.Surface Mount is the way in which it is mounted.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~125°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.8 terminations constitute its foundation.There are various parts that can be found under its base part number FAN3229.Devices are mounted by Surface Mount.The pins are configured with 8 when designing the chip.The device is specifically designed to function with a supply voltage of 12V V.In this case, FULL BRIDGE BASED PERIPHERAL DRIVER serves as the interface IC.As a maximum, there is 3A limit to the output current.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The basis of this model has 1 outputs integrated.Mosfet driver supports an output current of 3A.Its maximum power dissipation of 460mW shows its power loss capacity without overheating.As a precaution, make sure the supply current is kept at 1.2mA.A gate driver in the Automotive, AEC-Q100 series is included in this document.
FAN3229CMX-F085 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 460mW
Operating with the supply voltage of Automotive, AEC-Q100
FAN3229CMX-F085 Applications
There are a lot of ON Semiconductor FAN3229CMX-F085 gate drivers applications.
- PCMCIA applications
- Isolated Gate Driver Supplies
- Welding
- Automotive Applications
- High current laser/LED systems
- High-speed communications
- Commercial and agricultural vehicles (CAV)
- Multicolor LED/laser displays
- DC/DC converters
- Isolated Supplies for controller area network (CAN),