EPM9480RC208-20
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 676 FLIP FLOPS; CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of I/O | 146 |
| Clock Frequency | 100MHz |
| Propagation Delay | 23.4 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Logic Blocks (LABs) | 30 |
| Output Function | MACROCELL |
| Number of Macro Cells | 480 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
EPM9480RC208-20 Overview
The mobile phone network has 480 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is programmed with 146 I/Os.The device is programmed with 208 terminations.QUADis the terminal position of this electrical part.It is powered by a voltage of 5V volts.This part is part of the family [0].In this chip, the 208pins are programmed.It is also possible to find 676 FLIP FLOPS; CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vwhen using this device.For digital circuits, there are 10000gates. These devices serve as building blocks.A Surface Mountis mounted on this electronic component.The system runs on a power supply of 3.3/55V watts.In this case, the maximum supply voltage (Vsup) is 5.25V.In order to operate, the temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.The logic block consists of 30 l logic blocks (LABs).If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.It is recommended that the clock frequency not exceed 100MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM9480RC208-20 Features
146 I/Os
208 pin count
3.3/55V power supplies
30 logic blocks (LABs)
EPM9480RC208-20 Applications
There are a lot of Altera EPM9480RC208-20 CPLDs applications.
- Discrete logic functions
- USB Bus
- Battery operated portable devices
- Wide Vin Industrial low power SMPS
- State machine control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- High speed graphics processing
- Software-driven hardware configuration
- Portable digital devices
- I/O expansion