EPM7512BUC169-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 169 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 169 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 141 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7512BUC169-7N Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).BGAis the package in which it resides.In this case, there are 141 I/Os programmed.There is a 169terminations set on devices.This electrical part has a terminal position of BOTTOMand is connected to the ground.The power source is powered by 2.5Vvolts.There is a part in the family [0].It is equipped with 169 pin count.If you use this device, you will also find [0].10000gates are used to construct digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.The device has a pinout of [0].A voltage of 3.6V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 3V.Currently, it is powered by 1.8/3.32.5Vsources.There are 100 programmable I/Os in this system.A frequency of 166.67MHzcan be achieved.In order to operate, the temperature should be higher than 0°C.It is recommended that the operating temperature be below 70°C.There are 32logic blocks (LABs) that make up its basic building block.It is recommended that the maximum frequency is less than 0.Programmable logic types are divided into EE PLD.
EPM7512BUC169-7N Features
BGA package
141 I/Os
169 pin count
160 pins
1.8/3.32.5V power supplies
32 logic blocks (LABs)
EPM7512BUC169-7N Applications
There are a lot of Altera EPM7512BUC169-7N CPLDs applications.
- Pattern recognition
- Storage Cards and Storage Racks
- Digital designs
- Protection relays
- Complex programmable logic devices
- Programmable power management
- Cross-Matrix Switch
- PLC analog input modules
- Boolean function generators
- Digital multiplexers