EPM7256ERC208-15
| Parameters | |
|---|---|
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 90.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 164 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
EPM7256ERC208-15 Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].In this case, there are 164 I/Os programmed.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is provided by a supply voltage of 5V volts.It is a part of the family [0].It has 208pins programmed.This device is also capable of displaying [0].5000gates are devices that serve as building blocks for digital circuits.The supply voltage should be maintained at 5V for high efficiency.It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.It is designed with 208 pins.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 4.75V is required for this device to operate.A total of 164 Programmable I/Os are available.You can achieve 100MHzfrequencies.In order to operate properly, the operating temperature should be higher than 0°C.The operating temperature should be lower than 70°C.There are 16 logic blocks (LABs) in its basic building block.The maximal frequency should be lower than 90.9MHz.A programmable logic type is classified as EE PLD.
EPM7256ERC208-15 Features
QFP package
164 I/Os
208 pin count
208 pins
16 logic blocks (LABs)
EPM7256ERC208-15 Applications
There are a lot of Altera EPM7256ERC208-15 CPLDs applications.
- Multiple Clock Source Selection
- PULSE WIDTH MODULATION (PWM)
- Reset swapping
- Address decoders
- DDC INTERFACE
- Handheld digital devices
- Address decoding
- TIMERS/COUNTERS
- Voltage level translation
- Random logic replacement