EPM7256EQC160-20
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | EE PLD |
| Number of I/O | 132 |
| Clock Frequency | 83.3MHz |
| Propagation Delay | 20 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 20ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
EPM7256EQC160-20 Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 160-BQFP package.As a result, it has 132 I/O ports programmed.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 5V volts.This part is in the family [0].As a result, it is packaged as Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.The chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the MAX? 7000 series.Additionally, this device is capable of displaying [0].The EPM7256can be used to identify its related parts.5000gates are used to construct digital circuits.In total, there are 16 logic elements/blocks.It runs on a voltage of 3.3/55Vvolts.In this case, the maximum supply voltage (Vsup) is 5.25V.It is important that the supply voltage (Vsup) exceeds 4.75VV.It is recommended that the clock frequency not exceed 83.3MHz.
EPM7256EQC160-20 Features
160-BQFP package
132 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7256EQC160-20 Applications
There are a lot of Intel EPM7256EQC160-20 CPLDs applications.
- ROM patching
- Parity generators
- Custom shift registers
- I2C BUS INTERFACE
- POWER-SAVING MODES
- Programmable polarity
- INTERRUPT SYSTEM
- Discrete logic functions
- Handheld digital devices
- ON-CHIP OSCILLATOR CIRCUIT