EPM7256BUC169-10
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 169 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 169 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 141 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7256BUC169-10 Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is enclosed in a BGA package.It is equipped with 141I/O ports.There is a 169terminations set on devices.This electrical part is wired with a terminal position of BOTTOM.A voltage of 2.5Vprovides power to the device.This part is included in Programmable Logic Devices.It is equipped with 169 pin count.This device also displays [0].A digital circuit is built using 5000gates.For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.The 160pins are designed into the board.With a maximum supply voltage of [0], it operates.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 1.8/3.32.5Vis required to operate it.There are a total of 100 Programmable I/Os.This frequency can be achieved at 125MHz.It is recommended that the operating temperature exceeds 0°C.A temperature less than 70°Cshould be used for operation.The program consists of 16 logic blocks (LABs).Maximum frequency should be less than 188.7MHz.Types of programmable logic are divided into EE PLD.
EPM7256BUC169-10 Features
BGA package
141 I/Os
169 pin count
160 pins
1.8/3.32.5V power supplies
16 logic blocks (LABs)
EPM7256BUC169-10 Applications
There are a lot of Altera EPM7256BUC169-10 CPLDs applications.
- Programmable polarity
- Page register
- Power automation
- Discrete logic functions
- Handheld digital devices
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- POWER-SAVING MODES
- Interface bridging
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Reset swapping