EPM7256AETC100-7N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7256AETC100-7N Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).A TQFP package contains the item.This device has 84 I/O ports programmed into it.There are 100 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 3.3V.There is a part in the family [0].It has 100pins programmed.When using this device, YEScan also be found.A digital circuit can be constructed using 5000gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.The electronic part is mounted by Surface Mount.This board has 100 pins.There is a maximum supply voltage of 3.6V.With a minimal supply voltage of [0], it operates.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This frequency can be achieved at 166.67MHz.It is recommended that the operating temperature exceeds 0°C.It is recommended that the operating temperature be lower than 70°C.It is composed of 16 logic blocks (LABs).A maximum frequency of less than 172.4MHzis recommended.A programmable logic type is categorized as EE PLD.
EPM7256AETC100-7N Features
TQFP package
84 I/Os
100 pin count
100 pins
16 logic blocks (LABs)
EPM7256AETC100-7N Applications
There are a lot of Altera EPM7256AETC100-7N CPLDs applications.
- Field programmable gate
- Programmable polarity
- Power automation
- Storage Cards and Storage Racks
- PULSE WIDTH MODULATION (PWM)
- ON-CHIP OSCILLATOR CIRCUIT
- Cross-Matrix Switch
- Synchronous or asynchronous mode
- Preset swapping
- Address decoders