EPM7192SQI160-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 124 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3750 |
| Number of Programmable I/O | 124 |
| Number of Logic Blocks (LABs) | 12 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 3.4mm |
| Length | 28mm |
| Width | 28mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7192SQI160-10N Overview
192macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A PQFP package contains the item.The device is programmed with 124 I/O ports.There are 160 terminations programmed into the device.QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 5V volts.It is included in Programmable Logic Devices.There are 160 pins on the chip.In digital circuits, there are 3750gates, which act as a basic building block.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.Surface Mountis the mounting point of this electronic part.The device is designed with pins [0].This device operates at a voltage of 5.25Vas its maximum supply voltage.In order for it to operate, a supply voltage of 4.75Vis required.There are a total of 124 Programmable I/Os.It is possible to achieve a frequency of 125MHz.It is recommended that the operating temperature be greater than -40°C.It is recommended that the operating temperature be lower than 85°C.The system consists of 12 logic blocks (LABs).There should be a lower maximum frequency than 125MHz.This kind of FPGA is composed of EE PLD.
EPM7192SQI160-10N Features
PQFP package
124 I/Os
160 pin count
160 pins
12 logic blocks (LABs)
EPM7192SQI160-10N Applications
There are a lot of Altera EPM7192SQI160-10N CPLDs applications.
- Wide Vin Industrial low power SMPS
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Multiple DIP Switch Replacement
- DDC INTERFACE
- Protection relays
- Software-driven hardware configuration
- Random logic replacement
- ON-CHIP OSCILLATOR CIRCUIT
- Address decoding
- Digital multiplexers