EPM7192EGC160-12
| Parameters | |
|---|---|
| Mount | Surface Mount, Through Hole |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 160 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 124 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 90.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3750 |
| Number of Programmable I/O | 124 |
| Number of Logic Blocks (LABs) | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height | 3.56mm |
| Length | 39.62mm |
| Width | 39.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7192EGC160-12 Overview
The mobile phone network has 192 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There are 124 I/Os programmed in it.Devices are programmed with terminations of [0].Its terminal position is PERPENDICULAR.A voltage of 5Vprovides power to the device.This part is included in Programmable Logic Devices.In this chip, the 160pins are programmed.It is also characterized by CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V.In digital circuits, 3750gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is adopted to store data in [0].Surface Mount, Through Holeis the mounting point of this electronic part.The device is designed with pins [0].There is a maximum supply voltage of 5.25V.A minimum supply voltage of 4.75V is required for this device to operate.A total of 124programmable I/Os are available.This can be achieved at a frequency of 125MHz.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.In its simplest form, it consists of 12 logic blocks (LABs).The maximal frequency should be lower than 90.9MHz.There is a type of programmable logic called EE PLD.
EPM7192EGC160-12 Features
124 I/Os
160 pin count
160 pins
12 logic blocks (LABs)
EPM7192EGC160-12 Applications
There are a lot of Altera EPM7192EGC160-12 CPLDs applications.
- Parity generators
- Pattern recognition
- ON-CHIP OSCILLATOR CIRCUIT
- I/O expansion
- Software Configuration of Add-In Boards
- Software-Driven Hardware Configuration
- Cross-Matrix Switch
- Power up sequencing
- Digital designs
- Network Interface Card (NIC) and Host Bus Adapter (HBA)